ADHESIVES

TEROSON® MS 9399 is excellent for UV and wearing resistance. After mixing, this highly viscous, sag-resistant, 2-part adhesive has a room temperature cure, short tack-free time and high initial strength. It’s also free from solvents, isocyanates and silicone, and perfect for elastic bonding in caravan manufacture, the railroad vehicle industry or shipbuilding.

3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. This primer helps to significantly improve initial and ultimate adhesion to many materials such as plastics and paints because of their low surface energy or the additives they may contain. A primer creates a new surface for 3M™ VHB™ Tape to adhere to, and can also create a layer that may impede the migration of additives that may be present in a material.

3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. This primer helps to significantly improve initial and ultimate adhesion to many materials such as plastics and paints because of their low surface energy or the additives they may contain. A primer creates a new surface for 3M™ VHB™ Tape to adhere to, and can also create a layer that may impede the migration of additives that may be present in a material.

3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. This primer helps to significantly improve initial and ultimate adhesion to many materials such as plastics and paints because of their low surface energy or the additives they may contain. A primer creates a new surface for 3M™ VHB™ Tape to adhere to, and can also create a layer that may impede the migration of additives that may be present in a material.

3M™ Adhesive Sealant 760 UV is a high-performance sealant for durable bonding applications. This single-component, moisture-curing sealant is permanently elastic and is capable of bonding dissimilar materials, offering long-lasting bonds and design flexibility. It also offers exceptional UV resistance, long term durability and is paintable when wet. Features a 10-to 30-minute skin time, paintable immediately.

3M™ Adhesive Sealant 760 UV is a high-performance sealant for durable bonding applications. This single-component, moisture-curing sealant is permanently elastic and is capable of bonding dissimilar materials, offering long-lasting bonds and design flexibility. It also offers exceptional UV resistance, long term durability and is paintable when wet. Features a 10-to 30-minute skin time, paintable immediately.

3M™ Industrial Cleaners and Adhesive Removers Low VOC <20% are ideal for helping dissolve and remove dirt, grease, tar, and many non-curing type adhesives. They clean without streaking and have proven to be excellent for surface preparation in adhesive applications. While these multipurpose cleaners are suitable for industrial use, they are also safe enough for everyday projects.

3M™ Citrus Base Cleaner is a citrus based aerosol cleaner used to help dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It cleans without streaking and has a fresh citrus scent. This heavy duty industrial cleaner and degreaser helps soften and loosen grease, oil and grime. It is a citrus oil based cleaner not based on chlorinated solvents or petroleum distillates. This highly effective aerosol cleaner can be used to clean and degrease metal parts, motors, tools, printing presses, concrete or almost any dirty or greasy surface.

CRC Canada Water Based Silicone 73035 is a heavy duty silicone lubricant that is both non-flammable and NSF H1 registered, making it suitable for incidental contact with food. This lubricant effectively prevents sticking and binding, ensuring safe application on a variety of surfaces. It is ideal for use in food processing and handling equipment, including chutes, guides, rails, conveyors, bottling machinery, slicers, ovens, freezers, knives, saws, linkages, locks, pulleys, timers, rubber seals, tools, and ceramic insulators.

3M™ Scotch-Weld™ Plus II Applicator W 2:1 and 1:1 Plunger is a self-contained metering, mixing and dispensing machine that simultaneously meters and mixes two-part adhesives as the material is applied. Simultaneously meters and mixes two-part adhesives as the material is applied.

Walter SLAP SHOT™ is a heavy duty highly effective, residue-free, fast evaporating cleaner/degreaser that dissolves and removes grease, oil, and grime on contact. NSF category K1, registration #154299 (Aerosol) #154300 (Liquid). Designed for industrial and metalworking applications.

3M™ Fastbond™ Contact Adhesive 30 is a low-odour, water-based adhesive designed to have high strength, high coverage, a long bonding range, and good heat resistance. It has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas.

ASI DS Manual Dispensing Gun DS99490 is a manual applicator designed for use with 490 ml cartridges. It operates with a 10:1 mixing ratio, making it suitable for various applications that require precise dispensing.

ASI DS Manual Dispensing Gun DS99500 KA is a manual applicator designed for precise dispensing, featuring a capacity of 50 ml. It is available in two mixing ratios: 1:1 and 10L1, catering to various application needs.

ASI Epoxy Adhesive MP5405 is a two part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough semi-rigid material and is free flowing in viscosity. It features good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either dispensing equipment or side-by-side dual cartridges. A handling cure is normally achieved at room temperature within 3-5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Surebonder Full Size All Temperature Glue Sticks 725R510 are clear all-purpose hot melt adhesives to be applied in either low, high, or dual temperature glue guns. This glue is great for craft projects and product assembly projects. A must for the DIY homeowner. Bonds to porous and non-porous materials. Each glue stick is 10-Inch in length and 7/16-inch in diameter. Approximately 90 pieces per box.

3M™ Scotch-Weld™ Hot Melt Adhesive 3762LM-PG is 100% solids, thermoplastic resin formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking, and assembly. These features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated, and other fibrous substrates. It provides strong shear strength, which means your packages stay sealed and components stay bonded under most conditions.

LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. Suited for bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.

LOCTITE® 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. Used for bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

3M™ Scotch-Weld™ Dual Drive Manual Applicators are used to dispense two-component 3M™ Scotch-Weld™ Structural Adhesives packaged in Duo-Pak (DP) cartridges. There are a variety of applicators available to match the needs of your manufacturing process. Manual hand motion drives the dual pistons directly into the Duo-Pak cartridge, applying equal pressure and feeding the two components of the adhesive directly into the mixing nozzle (sold separately). These manual applicators offer take-it-to-the job convenience: no air hoses or electrical cords necessary.

3M™ Scotch-Weld™ Mixing Nozzles perform to exact requirements for easy uniform application. These 3M-approved accessories work with 3M™ Duo-Pak Cartridges to simultaneously meter, mix, and apply two-part adhesives and potting compounds. The tapered tips can be cut for precise bead size.

3M™ Scotch-Weld™ Mixing Nozzles perform to exact requirements for easy uniform application. These 3M-approved accessories work with 3M™ Duo-Pak Cartridges to simultaneously meter, mix, and apply two-part adhesives and potting compounds. The tapered tips can be cut for precise bead size.

3M™ Scotch-Weld™ Dual Drive Pneumatic Applicator is a 2-component multi-ratio dispenser that offers exceptional dispensing with full flexibility. Unique cradle design allows cartridges with multiple mix ratios to be used in one common dispenser. The functional design with improved handle ergonomics offers more comfort and control all in a modern look & feel. Ideal for bonding, sealing, solid surface, gap filling, shimming and encapsulation.

LOCTITE® 680 is a green, high strength, methacrylate ester acrylic liquid designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required. The product prevents loosening and leakage from shock and vibration. It provides robust curing performance. It works on active metals (e.g. mild steel) and on passive substrates (e.g. stainless steel and plated surfaces).

Dow Corning DOWSIL™ 732 is a multi-purpose acetoxy RTV sealant designed for a wide range of industrial sealing and bonding tasks. This one-part adhesive cures at room temperature upon exposure to moisture in the air, utilizing an acetoxy cure system. Its non-sag, paste-like consistency makes application straightforward, and once cured, it forms a durable, flexible rubber that adheres well to various substrates. Additionally, it meets the standards set by MIL-A-46106 and FDA 177.2600, ensuring its reliability in demanding environments.