ADHESIVES

3M™ Heavy Duty Spray Adhesive 20 is an economical, versatile, fast-drying spray adhesive that bonds a range of lightweight materials. This spray adhesive has an aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. Capable of forming bonds on a wide array of materials, including paper, cardboard, fabric and insulation. It also works well with plastic, metal, wood and much more.

3M™ Hi-Strength Spray Adhesive 90 is a high strength, fast contact-type adhesive. It has fast contact strength build-up for many decorative laminates. This spray adhesive is ideal for applications that require spraying down. Creates a high strength fast tack bond to concrete, wood, MDF, laminates, or polyethylene. It has excellent moisture resistance.

3M™ Hi-Tack Spray Adhesive 76 is an industrial aerosol spray adhesive with high-tack properties for one-surface bonding applications. This high-tack adhesive effectively bonds materials, including rubber, fabric, felt, foil, glass, cardboard, wood, metal and many hard-to-hold materials, such as polyethylene and polypropylene. Designed with a variable-width lace spray pattern to minimize waste and overspray. Its low-misting property also allows for precise spray control.

3M™ HoldFast Spray Adhesive 70 is an extremely versatile, fast-tacking industrial grade spray adhesive with a unique wide-web spray pattern well suited for bonding a variety of construction materials. It requires a short dry time yet provides long open time to perfectly position your materials. It is an effective adhesive for waterproofing and protecting from moisture. Helps to create a quick, permanent bond on many substrates, including polystyrene, drainboard, insulation, foams, and fabrics. It is typically used in construction, specialty vehicle, RV, manufactured housing, and HVAC. It is packaged in a pre pressurized canister for an easy to use, maintenance free delivery system.

3M™ Multi-Purpose Spray Adhesive Super 77™ is a high-tack, high-coverage and fast drying adhesive. It is fast drying adhesive that bonds quickly within 15 seconds and offers high coverage and low soak in for long lasting bond. The spray is great for permanently attaching foils, carpeting, lightweight foams, paper, cardboard, felt, and cloth to painted or unpainted metals, wood, and hardboard. Bonds lightweight materials.

Nashua 357 Low VOC Premium Spray Adhesive is a versatile product that is perfect for a variety of applications. It is great for bonding carpets, securing insulation/liner materials to duct work, and securing labels. Whether you need a permanent or temporary bond, this adhesive is up for the task. It can bond fabric, insulation, plastic films, felt, rubber leather, cork, paper, cardboard, metal, and wood. The adhesive is rubber based, with fast skin, fast grab, and low soak-in properties. It performs well over a wide temperature range and has good UV, moisture, and oxidation resistance. Additionally, it is excellent for laminating foam materials to a variety of substrates.

3M™ Hi-Strength Spray Adhesive 90 is a high strength, industrial grade fast contact-type adhesive. It has fast contact strength build-up for many decorative laminates. This adhesive is ideal for applications that require spraying down. Creates a high strength fast tack bond to concrete, wood, MDF, laminates, or polyethylene. It has excellent moisture resistance.

3M™ Hi-Strength Non-Flammable Adhesive 98 NF adhesive is often used in marine and specialty vehicle applications to install carpet, rubber or synthetic flooring. The formula's aggressive tack offers a fast grab with sufficient open time to position and adjust materials before bonding. With a solids weight percentage of 15-25, the adhesive provides high coverage with less waste and helps create a uniform hold. As with all contact based adhesives, you want to apply sufficient and uniform pressure to ensure a strong bond.

ASI Static Mix Nozzle DS991018 is designed for use with 490 ml cartridges and features a Luer Lock tip type. With an overall length of 8.5 inches, this static mixer is specifically engineered for a 10:1 mixing ratio, ensuring efficient and consistent results in various applications.

LOCTITE® high performance static mix nozzles for 10, 12 and 50 ml cartridges (B & S-System) make light work of mixing 2-part adhesives to the ideal ratio. They work with both manual and pneumatic (compressed air powered) applicators, and come in multiple nozzle and tip styles.

LOCTITE® Static Mix Nozzles for 200 and 400 ml C-System Cartridges make light work of mixing 2-part adhesives to the ideal ratio. They work with both manual and pneumatic (compressed air powered) applicators, and come in multiple nozzle and tip styles.

LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. Ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).

LOCTITE® AA H3410 adhesive system is designed to have excellent bond strength on multiple substrates. It offers superior peel and impact resistance and is compatible with metal pre-treatment and paint bake cycles. This adhesive contains 0.25 mm (10 mil) glass beads to insure adequate bond line control.

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperature and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, this adhesive contributes to a safer work environment compared to typical acrylic adhesives. Features a strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. With a mix ratio of 1:1, it provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C).

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperature and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, this adhesive contributes to a safer work environment compared to typical acrylic adhesives. Features a strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. With a mix ratio of 1:1, it provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C).

LOCTITE® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It also provides high elongation and excellent cold temperature impact strength. It forms resilient bonds and maintains its strength over a wide range of temperatures.

ASI Structural Adhesive MP55420 is a high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. This adhesive greatly increases the reliability of finished assemblies with exceptional flexibility, its ability to with stand extreme temperature fluctuation and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. For use on as received metal surfaces including aluminum, stainless and plated steels and forms tough, high strength bonds without surface preparation.

ASI Structural Adhesive MP55420 is a high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. This adhesive greatly increases the reliability of finished assemblies with exceptional flexibility, its ability to with stand extreme temperature fluctuation and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. For use on as received metal surfaces including aluminum, stainless and plated steels and forms tough, high strength bonds without surface preparation.

LOCTITE® 263 is a red, high-strength, primerless threadlocker for permanently locking and sealing bolts, nuts and studs to prevent loosening due to vibration. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces without the use of primer. Suitable for use on most oil-coated, “as-received” fasteners without cleaning.

LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.

LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.

LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.

LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration. LOCTITE 243 works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.