Epoxy Adhesives

LOCTITE® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It also provides high elongation and excellent cold temperature impact strength. It forms resilient bonds and maintains its strength over a wide range of temperatures.

3M™ Scotch-Weld™ Plus II Applicator W 2:1 and 1:1 Plunger is a self-contained metering, mixing and dispensing machine that simultaneously meters and mixes two-part adhesives as the material is applied. Simultaneously meters and mixes two-part adhesives as the material is applied.

LOCTITE® high performance static mix nozzles for 10, 12 and 50 ml cartridges (B & S-System) make light work of mixing 2-part adhesives to the ideal ratio. They work with both manual and pneumatic (compressed air powered) applicators, and come in multiple nozzle and tip styles.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperature and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, this adhesive contributes to a safer work environment compared to typical acrylic adhesives. Features a strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. With a mix ratio of 1:1, it provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C).

LOCTITE® Static Mix Nozzles for 200 and 400 ml C-System Cartridges make light work of mixing 2-part adhesives to the ideal ratio. They work with both manual and pneumatic (compressed air powered) applicators, and come in multiple nozzle and tip styles.

Sag-resistant, 2-part adhesive with very high viscosity. It cures independently of atmospheric moisture to an elastic product; is free from solvents, isocyanates and silicones; and is ideal for both indoor and outdoor use. For excellent UV and wearing resistance, TEROSON® MS 9399 is a great choice. After mixing, this highly viscous, sag-resistant, 2-part adhesive has a room temperature cure, short tack-free time and high initial strength. It’s also free from solvents, isocyanates and silicone, and perfect for elastic bonding in caravan manufacture, the railroad vehicle industry or shipbuilding.

LOCTITE® AA H3410 adhesive system is designed to have excellent bond strength on multiple substrates. It offers superior peel and impact resistance and is compatible with metal pre-treatment and paint bake cycles. This adhesive contains 0.25 mm (10 mil) glass beads to insure adequate bond line control.

LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. Ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperature and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, this adhesive contributes to a safer work environment compared to typical acrylic adhesives. Features a strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. With a mix ratio of 1:1, it provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C).