TAPE

3M™ Adhesive Transfer Tape 468MP offers good adhesion on metal and high surface energy plastics. 200MP delivers excellent shear strength to resist slippage and edge lifting. Temporarily repositionable for placement accuracy, this tape also performs well after exposure to humidity and hot/cold temperatures. For applications such as splicing and laminating procedures using metals and HSE plastics. This adhesive transfer tape also resists solvents, humidity, moisture, as well as temperatures up to 400°F / 204°C for short periods.

Scapa U263-PK is a pink acrylic transfer adhesive that is perfect for high-speed flying splices. It comes with a 50# tan kraft release liner, making it easy to use for a variety of applications such as flying splices, decorative parts, nameplates, envelope closure, core starting, and general purpose assembly. The product offers benefits such as easy unwind and removal of the liner for quick application, high quick-stick, fast build-up of adhesion, excellent holding power at elevated oven temperatures, and specific adhesion to paper, plastic films, metal foils, and more. It can also be used with automatic tape guns and has a service temperature range of -40°C to 121°C, with a short-term temperature limit of 148°C.

Scapa 0485 is a solvent-free rubber resin based hot melt adhesive that is perfect for a wide range of applications. It comes in an amber colour and is conveniently supplied on a white paper liner that is easy to remove. This adhesive is ideal for fixing carpets, decorative edging, roof bars on commercial vehicles, and much more. It forms a strong waterproof bond and has excellent bond strength. This tape is an clean and easy-to-use alternative to brush-on adhesives, with the added benefit of being non-hardening and permanently flexible. It is a well-established product with a long track record of success, making it a reliable choice for all your bonding needs.

Scapa 0485 is a solvent-free rubber resin based hot melt adhesive that is perfect for a wide range of applications. It comes in an amber colour and is conveniently supplied on a white paper liner that is easy to remove. This adhesive is ideal for fixing carpets, decorative edging, roof bars on commercial vehicles, and much more. It forms a strong waterproof bond and has excellent bond strength. This tape is an clean and easy-to-use alternative to brush-on adhesives, with the added benefit of being non-hardening and permanently flexible. It is a well-established product with a long track record of success, making it a reliable choice for all your bonding needs.

3M™ Scrim Reinforced Adhesive Transfer Tape 97053 is a micro scrim reinforced 2.5 mil (0.06 mm) thick acrylic adhesive transfer tape specifically designed for difficult bonding applications. This high peel and tack tape features a 50 lb (22.68 kg) glassine liner and has excellent quick-stick for permanent bond applications on plastics, metals, non-wovens, felts, foams (including polyurethane), polyether, polyester, neoprene, polyethylene, and EPDM.

Scotch® Transparent Tape can help you take on the everyday jobs. Glossy and transparent, this tape glides off the roll and holds strong, making it ideal for wrapping packages, sealing envelopes, or repairing rips and tears. So whether you’re at home, school, or the office, reach for Scotch® Transparent Tape to help you hold it together.

Scapa S301 is a versatile UPVC film that is double coated with a high tack, high peel acrylic adhesive. This product is ideal for product assembly, demanding bonding and splicing applications, as well as lamination to various materials such as EPDM rubber, plastics, glass, and urethane foams. The uPVC film allows for conformability, while the very high adhesive mass provides excellent gap-filling properties. With exceptional resistance to environmental extremes and excellent adhesion to ether and ester foams, this product bonds well to rough and porous surfaces. The service temperature ranges from -40°F to +200°F (-40°C to +93°C).

Scapa S301 is a versatile UPVC film that is double coated with a high tack, high peel acrylic adhesive. This product is ideal for product assembly, demanding bonding and splicing applications, as well as lamination to various materials such as EPDM rubber, plastics, glass, and urethane foams. The uPVC film allows for conformability, while the very high adhesive mass provides excellent gap-filling properties. With exceptional resistance to environmental extremes and excellent adhesion to ether and ester foams, this product bonds well to rough and porous surfaces. The service temperature ranges from -40°F to +200°F (-40°C to +93°C).

Scapa S301 is a versatile UPVC film that is double coated with a high tack, high peel acrylic adhesive. This product is ideal for product assembly, demanding bonding and splicing applications, as well as lamination to various materials such as EPDM rubber, plastics, glass, and urethane foams. The uPVC film allows for conformability, while the very high adhesive mass provides excellent gap-filling properties. With exceptional resistance to environmental extremes and excellent adhesion to ether and ester foams, this product bonds well to rough and porous surfaces. The service temperature ranges from -40°F to +200°F (-40°C to +93°C).

Scapa S301 is a versatile UPVC film that is double coated with a high tack, high peel acrylic adhesive. This product is ideal for product assembly, demanding bonding and splicing applications, as well as lamination to various materials such as EPDM rubber, plastics, glass, and urethane foams. The uPVC film allows for conformability, while the very high adhesive mass provides excellent gap-filling properties. With exceptional resistance to environmental extremes and excellent adhesion to ether and ester foams, this product bonds well to rough and porous surfaces. The service temperature ranges from -40°F to +200°F (-40°C to +93°C).

Scapa S301 is a versatile UPVC film that is double coated with a high tack, high peel acrylic adhesive. This product is ideal for product assembly, demanding bonding and splicing applications, as well as lamination to various materials such as EPDM rubber, plastics, glass, and urethane foams. The uPVC film allows for conformability, while the very high adhesive mass provides excellent gap-filling properties. With exceptional resistance to environmental extremes and excellent adhesion to ether and ester foams, this product bonds well to rough and porous surfaces. The service temperature ranges from -40°F to +200°F (-40°C to +93°C).

Scapa S301 is a versatile UPVC film that is double coated with a high tack, high peel acrylic adhesive. This product is ideal for product assembly, demanding bonding and splicing applications, as well as lamination to various materials such as EPDM rubber, plastics, glass, and urethane foams. The uPVC film allows for conformability, while the very high adhesive mass provides excellent gap-filling properties. With exceptional resistance to environmental extremes and excellent adhesion to ether and ester foams, this product bonds well to rough and porous surfaces. The service temperature ranges from -40°F to +200°F (-40°C to +93°C).

3M™ VHB™ Adhesive Transfer Tape F9640PC is a 2 mil (0.5 mm) that leverages the high adhesion strength of 3M™ High Performance Acrylic Adhesive 100MP to offer nearly invisible fastening, with excellent long-term holding power. This aesthetically-pleasing solution can be pre-applied to trim for production flexibility, and is ideal for bonding dissimilar substrates. This product features excellent long-term holding power with high adhesion strength, making it ideal for many interior and exterior applications to replace rivets, spot welds, liquid adhesives, and other permanent fasteners. It is excellent for bonding decorative metal trim and flexible circuits to aluminum rigidizers or heat sinks.

3M™ VHB™ Commercial Vehicle Tape CV62F is a grey, 62 mil (1.57 mm), multi-purpose acrylic adhesive with a conformable, foam core and film liner. It is used for commercial vehicle sidewall panel to post and panel to panel attachment. The fast and easy to use permanent bonding method provides high strength and long-term durability. 3M™ VHB™ Commercial Vehicle Tape CV45F is used in commercial vehicle panel attachment such as trailers, truck bodies, ambulances, fire trucks and busses. It reliably bonds a variety of materials with strength and speed for permanent applications. They are specifically designed for good adhesion to metals, glass, and other medium, to high surface energy materials. Applications for this tape include commercial vehicle panel attachment as well as muntin bar and trim attachment, and simulated, divided light grill bars.

3M™ VHB™ Extrudable Tape GP is an extrudable high strength pressure-sensitive adhesive that requires little or no surface preparation for some substrates and offers immediate handling strength. This versatile material can be applied in variable widths and thicknesses and even around corners without wrinkles or gaps, and can provide an air- and watertight seal if desired. The hot bond line can be closed immediately with a second substrate, or a liner can be applied and the second substrate can be added to the cooled tape later. A stretch release feature allows the tape to be removed cleanly from a part by pulling parallel to the surface so the part can be reprocessed with minimal waste. Offers excellent adhesion to metals, glass, rubber, low surface energy (LSE) plastics, woven and non-woven textiles, and hard-to-bond materials, including slightly oily surfaces. This material has no special storage or curing requirements.

3M™ VHB™ Flame Retardant Tape 5958FR is a black, 40 mil (1.0 mm) double-sided tape comprised of a multi-purpose modified acrylic adhesive with a conformable, foam core when applied and requires no curing time. The advanced closed-cell acrylic technology offers secure bonding that performs on many painted and powder coated surfaces. Engineered to be strong, it can replace rivets, welds, and screws while providing faster production by eliminating the need for drilling, welding, grinding, and project cleanup. It performs in applications for short-term use (up to four hours) at a temperature up to 300°F (149°C) or long-term use withstanding up to 200°F (93°C) and meets flame retardant test FAR 25.853. This tape balances strength, viscoelasticity, conformability, and adhesion to various surfaces, such as stainless steel. These attributes make 3M™ VHB™ Flame Retardant Tape 5958FR a reliable choice to take on a variety of bonding and sealing applications in transportation, appliance, electronics, construction, signage, and general industrial.

3M™ VHB™ Tape 4947F is a black, 45 mil (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds, and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Adheres to a broad range of substrates, including aluminum, stainless steel, galvanized steel, composites, plastics, acrylic, polycarbonate, ABS, and painted or sealed wood and concrete. bonding tapes provide excellent shear strength, conformability, surface adhesion, and temperature resistance. They are commonly used in applications across a variety of markets including transportation, appliance, electronics, construction, sign and display, and general industrial.

3M™ VHB™ Tape 5915 is black, 16 mil (0.4 mm) double-sided tape comprised of a multi-purpose modified acrylic adhesive with a conformable, foam core when applied and requires no curing time. The advanced closed-cell acrylic technology offers secure bonding that performs on many painted and powder coated surfaces. Engineered to be strong, it can replace rivets, welds, and screws while providing faster production by eliminating the need for drilling, welding, grinding, and project cleanup. It performs in applications for short-term use (up to four hours) at a temperature up to 300°F (149°C) or long-term use withstanding up to 250°F (121°C). This tape balances strength, viscoelasticity, conformability, and adhesion to various surfaces, such as stainless steel.

3M™ VHB™ Tape 4655 is a dark grey, 62 mil (1.6 mm), general purpose adhesive with firm foam that has the added feature of high temperature resistance. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. These tapes utilize general purpose adhesive on both sides of firm foam. High temperature capability makes this family often suitable for bonding prior to high temperature paint processing. It is typically used on metal substrates such as aluminum, galvanized steel, and stainless steel. Applications for this tape include stiffener and panel attachment, including assembly before paint ovens, as well as decorative material and trim.

3M™ VHB™ Tape RP+ features a multi-purpose acrylic adhesive with a conformable foam core and can replace rivets, welds, and screws. The fast and easy-to-use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond a variety of surfaces, with temperature resistance of 230°C (450°F) for up to 4 hours. Commonly used in applications across a variety of industries including transportation, appliances, construction, sign and display, and general industrial. Skyscrapers, cell phones, electronic highway signs, refrigerators, architectural windows, and more all rely on this specialty bonding tape for one or more steps in the assembly, mounting, fastening, and sealing process.